Where to buy swann helicopter

The way the craft moves forward and back is by the tail boom which has a vertically orientated small prop that when activated overrides the physical gyro pitching the craft forward or back.

Left and right turns are achieved by a slowing of one of the main rotor pairs. For example if the user wishes to turn right, the clockwise turning main rotors slow down and the proportional increased drag by the counterclockwise main rotor still rotating at the same speed make the body turn right.

But it does make them very easy to fly. This makes it stable. It still does what you tell it to but in a damped way. It will have a swash plate under the lower blades which controls the direction it will go in left, right, forward or back.

You have to look at one to get the picture but when the swash plate is tilted the blades change their pitch continuously as the blades rotate causing an imbalance which tilts the helicopter. If you want it to go forward, the blades have more pitch as they go around the back than they do as they go around the front so it lifts the back of the heli. Real helicopters work like this too.

Really cool idea. Tatter Salad May 24, AM. Re: Sky Eye RC with camera. This manual is also suitable for: Micro lightning. Print page 1 Print document 8 pages. Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Sign In OR. Don't have an account? This is something to keep in mind when landing.

The Ceiling Effect: Conversely to the ground effect, when you fly too close to a ceiling, a small pocket of low pressure is created above the helicopter, and it will be sucked upwards. This could be bad — if you hit the ceiling, the helicopter will stall, fall and possibly be damaged. You may find that the more than one helicopter will be controlled by a single controller, and this can lead to crashes, accidents, injuries or other very undesirable outcomes.

However, you really do need a bit of space to get the most out of the helicopter. As soon as the helicopter shows any sign of running low on power such as responding slowly or being unable to maintain altitude easily turn it off and charge it as soon as practicable. For more information about battery care, see page 6. Because the rotors move in opposite directions, the helicopter has less of a tendency to spin the other way.

There are only two trim settings to get right, as opposed to the three trim settings that are required for the more conventional helicopter design. However, because the tail rotor is horizontal rather than vertical, the helicopter has a tendency to ascend whilst moving forwards, and descend whilst reversing.

The trim knob is located in the centre of the controller, between and just below the primary sticks. These batteries are light and powerful, as their chemistry is based on lithium, a light and extremely volatile metal. When the helicopter starts to lose power, turn it off and charge it as soon as practicable. Using other charging equipment will void your warranty, may damage the battery and poses a risk of fire or explosion.

Basically, obey all the guidelines and respect the power of lithium! Keep rotor away from your fingers, hair, eyes and other body parts. Parental supervision is required whenever this helicopter is in use by younger children. Avoid use of solvents, as these can damage the plastic components.

This will damage the electronic components, and could pose a severe risk to the built-in battery. Never use any other charging equipment! In the event of any damage, neither the helicopter nor controller should be used until the damage is completely repaired.

Not for Children under 3 years. Helicopters are complex things. Read and obey all warnings and directions in this manual and on the packaging. We wrote it because we mean it!

Insert batteries into the controller. Ensure that the helicopter is turned OFF. Turn the helicopter ON. Move the left control stick from minimum to maximum and back to minimum. Information Got questions or comments about this helicopter? E-mail: tech swannsecurity. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation.

Adjusting Trim: Rudder: Use the rudder trim adjustment knob, centre of controller. Do not touch the running propeller! Adult supervision is required! Never insert any sharp objects, pins or screws into the helicopter as this may puncture the internal battery!

Do not fly near eyes or face. November 8, James Kelly Gadgets 0. February 1, Ryan Cooper Gadgets 0. February 10, James Kelly Gadgets 0. March 19, Robert Birming Gadgets 2. August 24, Patra Beaulieu Gadgets 1. April 26, Ryan Cooper Gadgets February 11, Ryan Cooper Gadgets 2. June 11, James Kelly Gadgets 0. December 28, James Scott Deals , Gadgets 0.